LUMIBOARD is a rigid calcium silicate board for heat insulation and thermal resistant.
It offers outstanding non-wettability, heat insulation, and durability, used at locations in direct contact with molten aluminum during aluminum molding and processing processes.
Since it does not contain asbestos, it can be used as a replacement for asbestos cement board.
Advantages
- 1. MACHINABLE
- Can be machined by using Machining Centers and NC lathes
- 2. HIGH HEAT RESISTANT TEMPERATURE
- Heat resistant temperature : 1000 degrees celsius
- 3. NON-WETTABILITY WITH MOLTEN ALUMINUM
- Non-wettability used in direct contact with molten aluminum during aluminum molding and processing
Size of Blank Material
- Thickness : 12.7～101.6mm
- Length X Width : 1260X1275mm 1260X2550mm
Applications
- Float for aluminum casting
- Spouts for aluminum casting
- Gutter for aluminum casting
- Insulation material for holding furnace for aluminum casting
- Heat (Thermal) resistant material for machine parts
Properties of LUMIBOARD
| Units | LUMIBOARD L-14Z | LUMIBOARD L-100 | |
|---|---|---|---|
| Heat Resistant Temperature | degrees Celsius |
1000 | 1000 |
| Coefficient of Thermal Conductivity | W/m・k | 0.2 | 0.19 |
| Bending Strength | Mpa | 8.8 | 9.3 |
| Duro hardness | 64 | 64 | |
| Specific Gravity | 0.84 | 0.8 |
Swipe horizontally to see the list.
Delivery Form of LUMIBOARD
Please choose from among the following three types of the delivery form of LUMIBOARD.
- Finished Product
- Finished product after machining such as cutting, grinding and drilling based on your drawing will be supplied.
- Board Cut to Specified Dimensions
- Board without machining such as drilling, etc. and in the form of simply cutting the material according to the specified dimensions will be supplied.
- Blank Material
- Blank material without any machining will be supplied.
Minimum Order Quantity
1 Piece.