GLASS FIBER EPOXY RESIN LAMINATED BOARD has excellent electrical insulation performance, moisture resistance, dimensional stability, chemical resistance, adhesion properties, and especially alkaline resistance.
GLASS FIBER EPOXY RESIN LAMINATED BOARD is the material with the highest strength among FRP (Fiber Reinforced Plastics).
It has high strength and can be used as a structural material.
Advantages
- 1. MACHINABLE
- Can be machined by using Machining Centers and NC lathes
- 2. EXCELLENT ELECTRICAL INSULATION PERFORMANCE
- Insulation resistance : 106～108 MΩ
- 3. HIGH MECHANICAL STRENGTH
- Compressive strength : 400～500MPa
Bending strength : 400～500MPa
Size of Blank Material
- Thickness : 0.3～100mm
- Length X Width : 1000X1000 mm, 1000X2000 mm
Applications
- Electrical insulation material for electric equipment
- Electrical insulation material for heavy electric machinery
- Alternative products to metal products
- Heat (Thermal) insulation board for plastic injection mould (mold)
- Heat (Thermal) insulation board for plastic injection molding machine
Properties of GLASS FIBER EPOXY RESIN LAMINATED BOARD
| Test item | Unit | |
|---|---|---|
| Flatwise breakdown voltage | MV/m | 20 – 30 |
| Insulation resistance | MΩ | 106 – 108 |
| Bending strength | MPa | 400 – 500 |
| Compressive strength | MPa | 400 – 500 |
| Izod impact strength | J/cm | 5-6 |
| Heat resistant temperature | degrees Celsius | 120 |
| Coefficient of thermal conductivity | W/m・k | 0.3 |
| Specific gravity | 1.75 – 1.95 | |
| Water absorption | % | 0.02 |
Swipe horizontally to see the list.
The values above are measured values, not certified values.
Delivery Form of GLASS FIBER EPOXY RESIN LAMINATED BOARD
Please choose from among the following three types of the delivery form of GLASS FIBER EPOXY RESIN LAMINATED BOARD.
- Finished Product
- Finished product after machining such as cutting, grinding and drilling based on your drawing will be supplied.
- Board Cut to Specified Dimensions
- Board without machining such as drilling, etc. and in the form of simply cutting the material according to the specified dimensions will be supplied.
- Blank Material
- Blank material without any machining will be supplied.
Minimum Order Quantity
1 Piece.