SOLDER PALLETRICOCEL ES-3261R

RICOCEL ES-3261R is a high heat resistant glass fiber epoxy resin laminated board for solder pallet.

Component mounting by automatic soldering machine is performed through two kind of work processes.
Generally, it is performed in the order of reflow soldering to wave soldering.
At the wave soldering process, it is necessary to apply solder only to soldering part, with the components mounted by reflow soldering being protected.
RICOCEL is the tool used in the process of wave soldering.
RICOCEL has pockets to protect the pre-mounted components and has through-holes to apply solder only to soldering spots.

Features

Advantages of using solder pallet

Yield : Reduction of defective soldering
Masking process : Setting on pallet
Line width adjustment : Standardized
Thermal stress to electronic components : Small

RICOCEL ES-3261R

Advantages

1. EXCELLENT DURABILITY
Excellent durability against repetitive soldering of more than 20000-time.
2. EXCELLENT CHEMICAL RESISTANCE
Excellent chemical resistance against soluble flux or pallet cleaner.
3. EXCELLENT MECHANICAL STRENGTH
Excellent mechanical strength for fine machining.

Size of Blank Material

  • Thickness : 1.6~6mm
  • Length X Width : 1000X1200 mm 1200X2000 mm

Properties of RICOCEL ES-3261R

Test items Units ES-3261R
Reinforce material      Glass woven fabric
Surface resistance 10 volts applied Ω/□ 105~109
Glass transition temperature DMA degrees Celsius 200
TMA 170
Coefficient of thermal expansion Zα1(50→100degrees Celsius) ppm/℃ 45
Zα2(200→250degrees Celsius) 200
Warp/Fill(50→250degrees Celsius 10/13
Thermal conductivity Probe W/mK 0.36
Water absorption   0.04

Swipe horizontally to see the list.

The above figures are not guaranteed value but one of the test results at our laboratory.

Delivery Form of RICOCEL ES-3261R

Please choose from among the following three types of the delivery form of RICOCEL ES-3261R.

Finished Product
Finished product after machining such as cutting, grinding and drilling based on your drawing will be supplied.
Board Cut to Specified Dimensions
Board without machining such as drilling, etc. and in the form of simply cutting the material according to the specified dimensions will be supplied.
Blank Material
Blank material without any machining will be supplied.

Minimum Order Quantity

1 Piece.

To Page Top