MIOLEX PMX-573 is a rigid heat insulation board made by laminating glass fiber sheets and hardening them with an
inorganic binder.
It has high strength and can be used as a structural material.
Since it does not contain asbestos, it can be used as a replacement for asbestos cement board.
Advantages
- 1. MACHINABLE
- Can be machined by using Machining Centers and NC lathes
- 2. HIGH HEAT RESISTANT TEMPERATURE
- Heat resistant temperature : 250 degrees Celsius
- 3. HIGH MECHANICAL STRENGTH
- Compressive strength : 150～200MPa
Bending strength : 100～150MPa
Size of Blank Material
- Thickness : 1～50mm
- Length X Width : 1000X1000 mm
Applications
- Heat (Thermal) insulation board for plastic injection mould (mold)
- Heat (Thermal) insulation board for rubber injection mould (mold)
- Heat (Thermal) insulation board for plastic injection molding machine
- Heat (Thermal) insulation board for rubber injection molding machine
- Heat (Thermal) insulation board for textile machinery
- Heat (Thermal) insulation board for pouches and bag making machinery
- Heat (Thermal) insulation material for heater
- Heat (Thermal) insulation material for furnace
Properties of MIOLEX PMX-573
| Units | HIB-A | |
|---|---|---|
| Heat Resistant Temperature | degrees Celsius |
250 |
| Coefficient of Thermal Conductivity | W/m・k | 0.3 |
| Thermal Expansion Rate | 1/degrees Celsius |
6.6×10-6 |
| Compressive Strength | Mpa | 150～200 |
| Bending Strength | Mpa | 100～150 |
| Specific Gravity | 2.2 | |
| Water Absorption | ％ | 2～5 |
Swipe horizontally to see the list.
Delivery Form of MIOLEX PMX-573
Please choose from among the following three types of the delivery form of MIOLEX PMX-573.
- Finished Product
- Finished product after machining such as cutting, grinding and drilling based on your drawing will be supplied.
- Board Cut to Specified Dimensions
- Board without machining such as drilling, etc. and in the form of simply cutting the material according to the specified dimensions will be supplied.
- Blank Material
- Blank material without any machining will be supplied.
Minimum Order Quantity
1 Piece.