We, YUTAKA CORPORATION process various heat insulation(thermal insulation) boards and heat resistant materials to manufacture machinery parts for the general manufacturing sector such as
- Heat insulation(thermal insulation) board for plastic injection mould
- Heat insulation(thermal insulation) board for rubber injection molding machine
- Heat insulation(thermal insulation) material for furnace
- Sensor protection heat insulation(thermal insulation) box, etc.
In addition, we sell the materials of those heat insulation(thermal insulation) boards and heat resistant materials.
OUTLINE OF HEAT INSULATION
(THERMAL INSULATION) BOARD
AND HEAT RESISTANT MATERIAL
- Several kinds of heat insulation(thermal insulation) boards from budget-price type to high mechanical strength and high heat resistant type indicated in the table below can be supplied.
- High mechanical strength and can be used as a structural material.
- Since it does not contain asbestos, it can be used as a replacement for asbestos cement board.
- Based on the information of required characteristics, environment, and other applications, the optimum material will be selected.
Characteristics of Heat Insulation(thermal insulation) Boards
Swipe horizontally to see the list.
| Units | HIB-A | HIB-B | HIB-C | HIB-D | HIB-E | |
|---|---|---|---|---|---|---|
| Heat Resistant Temperature | ℃ | 250 | 500 | 400 | 200 | 200 |
| Coefficient of Thermal Conductivity | W/m・k | 0.3 | 0.3 | 0.3 | 0.3 | 0.13 |
| Thermal Expansion Rate | 1/℃ | 6.6×10-6 | 9.0×10-6 | 2.3×10-5 | 6.5×10-5 | 28×10-6 |
| Compressive Strength | Mpa | 150～200 | 120～150 | 420～480 | 500～580 | 300 |
| Bending Strength | Mpa | 100～150 | 45～55 | 120～130 | 450～540 | 200 |
| Specific Gravity | 2.2 | 2.2 | 2 | 1.8 | 1.4 | |
| Water Absorption | ％ | 2～5 | 4～6 | 0.1 | 0.05 | 0.1 |
| Grade | Standard | High Heat Resistant | High Heat Resistant and High Strength | High Strength | High Heat insulation(thermal insulation) |
Swipe horizontally to see the list.
| Units | HIB-F | HIB-G | HIB-H | HIB-I | HIB-J | |
|---|---|---|---|---|---|---|
| Heat Resistant Temperature | ℃ | 550 | 700 | 1000 | 300 | 130 |
| Coefficient of Thermal Conductivity | W/m・k | 0.22 | 0.22 | 0.14 | 0.44 | 0.25 |
| Thermal Expansion Rate | 1/℃ | 9～12×10-6 | 9～12×10-6 | |||
| Compressive Strength | Mpa | 108 | 245～300 | |||
| Bending Strength | Mpa | 130 | 120 | 8.8 | 29.5 | 105～195 |
| Specific Gravity | 2.2 | 2.1 | 0.84 | 1.75 | 1.4 | |
| Water Absorption | ％ | 0.3 | 0.5 | 3 | 1.3 | |
| Grade | High Heat Resistant | High Heat Resistant | High Heat Resistant | Low Cost | Low Cost |
Swipe horizontally to see the list.
Listed values are measured, it is not a guaranteed value.
Heat resistant temperature is for reference only, and varies depending on the operating conditions.
DIMENSIONS OF BLANK MATERIAL OF HEAT INSULATION(THERMAL INSULATION) BOARD AND HEAT RESISTANT MATERIAL
- Thickness : 0.1～100mm
- Length × Width : 900×1200 mm, 1000×1000 mm, 1000×2000 mm, etc.
Dimensions (thickness, length, width) of the heat insulation(thermal insulation) board are different for each material.
DELIVERY FORM OF HEAT INSULATION
(THERMAL INSULATION) BOARD AND
HEAT RESISTANT MATERIAL
Please choose from among the following three types of the delivery form of heat insulation(thermal insulation) board and heat resistant material.
- FINISHED PRODUCT
- Finished product after machining such as cutting, grinding and drilling based on your drawing will be supplied.
- BOARD CUT TO SPECIFIED DIMENSIONS
- Board without machining such as drilling, etc. and in the form of simply cutting the material according to the specified dimensions will be supplied.
- BLANK MATERIAL
- Blank material without any machining will be supplied.
APPLICATIONS
- Heat/Thermal insulation board for plastic injection mould (mold)
- Heat/Thermal insulation board for rubber injection mould (mold)
- Heat/Thermal insulation board for plastic injection molding machine
- Heat/Thermal insulation board for rubber injection molding machine
- Heat/Thermal insulation material for heater
- Heat/Thermal insulation material for furnace
- Heat/Thermal resistant consumable material for aluminum casting
- Heat/Thermal resistant material for food processing machinery
- Heat/Thermal resistant material for glass heat forming
- Heat/Thermal insulation board for textile machinery
- Heat/Thermal insulation board for pouches and bag making machinery
- Sensor protection heat/thermal insulation box
- Heat/Thermal resistant material for medical equipment
- Heat/Thermal resistant material for electric train
MINIMUM ORDER QUANTITY
1 Piece
DELIVERY TIME
After order confirmation, will be shipped from our factory within 1 to 10 weeks(depends on quantity of order)
PACKAGING DETAILS
Standard protective packaging such as cardboard boxes or wooden crates.
WORK FLOW FROM INQUIRY TO SHIPPING
- Inquiry
- Estimate (if necessary, selection of material properties)
- Order placement and payment
- Confirmation of payment
- Production
- Inspection
- Shipping