NEOARK is a rigid heat insulation board and also exhibits outstanding electrical insulation.
It has high strength and can be used as a structural material.
Since it does not contain asbestos, it can be used as a replacement for asbestos cement board.
Advantages
- 1. MACHINABLE
- Can be machined by using Machining Centers and NC lathes
- 2. HIGH HEAT RESISTANT TEMPERATURE
- Heat resistant temperature : 1000 degrees celsius
- 3. HIGH MECHANICAL STRENGTH
- Compressive strength : 154MPa
Bending strength : 39MPa
Size of Blank Material
- Thickness : 3～40mm
- Length X Width : 400X500 mm
Applications
- Heater terminal receivers
- Arc chutes
- LNG plant equipment
- Heat (Thermal) insulation board
- Heat (Thermal) resistant material
Properties of NEOARK
| Units | NEOARK | |
|---|---|---|
| Heat Resistant Temperature | degrees Celsius |
1000 |
| Coefficient of Thermal Conductivity | W/m・k | 0.51 |
| Compressive Strength | Mpa | 154 |
| Bending Strength | Mpa | 39 |
| Specific Gravity | 2.35 |
Swipe horizontally to see the list.
Delivery Form of NEOARK
Please choose from among the following three types of the delivery form of NEOARK.
- Finished Product
- Finished product after machining such as cutting, grinding and drilling based on your drawing will be supplied.
- Board Cut to Specified Dimensions
- Board without machining such as drilling, etc. and in the form of simply cutting the material according to the specified dimensions will be supplied.
- Blank Material
- Blank material without any machining will be supplied.
Minimum Order Quantity
1 Piece.